Still, also you know that crown molding is desirable. Suppose you know anything about home design and the casing market. However, use the following way to guide you along the way, If you’re interested in perfecting your home and want to know how to install crown molding yourself.
Step 1 Choose Your Type of Moulding
Before you can do anything, you will have to decide if you want to use wood, fiberboard( generally appertained to as MDF, medium viscosity fiberboard), or polyurethane. There are pros and cons to each type, depending on what you’re looking for. Wood is classic but more precious. Fiberboard is cheaper but poorer in quality. Polyurethane is indeed more precious but the most durable.
Still, do so before installing it, If you plan to paint your crown molding. It’ll be much harder latterly.
Step 2 Cut the Corner Pieces
Once you’ve chosen your material, you will want to start with the corners. They’re the hardest because of the angles. All the other pieces will lay flat against the wall, but the corners will have to be cut in a unique way in order to fit. You’ll need a managing aphorism to do this. However, use a premade corner block, If you’re a neophyte and are uneasy about getting the corner cuts just right. They’re formerly cut, so each you have to do is attach them. You can use caulking, but nails would be more secure.
Step 3 Measure the Length of the Walls and Cut the Moulding
Next, you will want to measure each section of the wall to see how vital molding you’ll need. With your corner blocks in place, measure from one block to the coming. Be as exact as possible in your dimension because you want the piece to fit impeccably in the middle. Cut the molding pieces according to the measures you recorded.
Still, you can buy precut external edge pieces that are formerly cut at forty- five-degree angles, If the room has a complicated shape( meaning it’s not a simple square or cube). When you use two right up against each other on an outside corner, they fit seamlessly and look professional.
Step 4 Attach the Moulding to the Wall
Since the corner pieces have formerly been secured, all you have to do is attach the long middle pieces. Attach the molding between the corner blocks, adding nails every twelve elevations or so. ( A nail gun makes this process go much more briskly.) After all the pieces are securely attached, you can use wood putty or makeup to disguise the nails. This may not be an issue if you have used dark wood for the moulding. However, you can use the same makeup on the nail heads previous to using them, If you have painted the molding. That will also beget to automatically blend by.
This four ways can help you transfigure your room from medium to elegant in a matter of hours. Your musketeers will not believe you did it yourself!
