Since you checked this article, I anticipate you’re professional enough to install a mantelpiece on your own. If you are pretty reachable with gear, it is honestly quite smooth. You can even keep a considerable amount of money alongside the manner.
When putting in your mantel, two key elements are vital: a) watching the proper distance of the mantel from the fireplace and b) making sure the mantel is securely attached to the wall.
Assuming that you already have the right mantelpiece of your choice, here are five easy steps to guide you. Just make sure you observe every successfully.
You will need the subsequent:
Tape Measure
Spirit Level
Drill
Masonry drill bit
Screwdriver
Circular noticed
Screws
Wood Putty
Step 1 – Dry in shape the Fireplace Mantel
Place your mantelpiece towards the hearth, precisely within the spot where you want it placed. Try to center it on the hole or firebox. You need to depart some clearance of at least 6 inches for protection measures. With the spirit stage, check the level. You want to ensure that the shelf is a degree from the front to the height of the mantel. You might also need to put timber shims under every leg till each degree is balanced.
Step 2 – Mark the Position
Now, mark the placement of the fireside mantel with the aid of tracing its definition with a pencil whilst it’s far nevertheless up against the wall. You may also want to do several outlining instances just to make sure. This will make it easier on the way to decide the location of your wooden guide, referred to as cleats, afterward.
Step 3 -The Cleats
Once the marking is finished, take the mantel piece down and lay it top-down on the ground. You now need to measure the width inside your shelf in addition to the length of the supporting legs to realize the period of the horizontal and vertical cleats. Using the round noticed, reduce 2X4-inch by using eight-foot pieces of lumber to make your cleats. Dry shape the interior to make sure a comfortable fit.
Step 4 – Drilling the Pilot Holes
Before drilling, degree first the width of the mantel edges, an excellent way to sit down flush towards the wall. Then in the pencil scribe of the mantel’s definition, mark the distance wherein you want to dangle the cleats. With the spirit stage, connect the dots.
While maintaining the cleats in the area, use the hammer to bore calmly spaced five holes thru the cleat forums and into the brick. Switching to the screwdriver drill bit, screw within the screws into the pre-drilled cleat boards and fireplace bricks. Do the equal system to the relaxation of the cleat legs.
Step 5 – Installing the Mantel
Install the mantelpiece on the wall. Make sure that you line it up with the hearth across the guide cleats. Use the hammer and screwdriver to screw in the completing screws at the pinnacle of the mantelpiece into the cleat. Countersink them slightly to cover them from view. Repeat the similar method with each of the mantel legs.
Step 6 – Finishing Touches
To cover the holes left through the screws, fill them in with wooden putty or decorative plugs that fit your mantelpiece. This will deliver your mantelpiece the expert look.
You can further customize your hearth mantel by placing your own family pics and other accents on its shelf. Or, better, spruce up your hearth by investing in functional and decorative fireside accessories for an even more captivating and exciting hearth experience.
